Iwatsu VOAC760 Manual page 228

Syntax
Instrument-specific status register
related
:DDER?
Reading of instrument-specific error
occurrence, event, status register
:DDEE[?]
Setting/reading of
instrument-specific error occurrence,
event, enable register
:MESR?
Reading of measurement, event,
status register
:MESE[?]
Setting/reading of measurement,
event, enable register
Others
:DFMT[?]
Setting/reading of response
message format
:TMOD[?]
Setting/reading of external trigger
terminal
:OPT
Setting/reading of optional switch
:SW1[?]
:SW2[?]
:SW3[?]
:SW4[?]
:DAC
Setting/reading of DAC output option
:MOD[?]
:COL[?]
Symbols for support status
Meaning of each symbol is as follows:
〇: Supported
✕: Not supported (always resulting in execution error)
―: No corresponding command/query
Functions
<Numerical program
data>
<Numerical program
data>
LONG|SHRT or 0|1
NEG|POS|OFF or 0|1|2
Parameters
Same as 3.5.17.1 DDER query
Same as 3.5.17.2 DDEE
command/query
Same as 3.5.17.3 MESR query
Same as 3.5.17.4 MESE
command/query
Execution error for all
commands with :OPT header
Execution error for all
commands with :DAC header
214
Remarks