Calculate1:Db Subsystem; Calculate[1]:Db:state Command/Query - Iwatsu VOAC760 Manual

3.5.3.4

CALCulate1:DB subsystem

3.5.3.4.1

CALCulate[1]:DB:STATe command/query

This performs setting/reading of ON/OFF for the dB calculation.
The dB calculation is only effective for DCV and ACV. In case other measuring function has been
selected, execution error occurs and command cannot be executed. The query repeats OFF.
Command syntax
:CALCulate[1]:DB:STATe <off_on>
<off_on>
<Character program data>
OFF
ON
The scaling function and dB calculation function are exclusive functions. The dB calculation turns
ON by this command, the scaling function turns OFF.
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
:CALCulate[1]:DB:STATe?
Response message <off_on>
<off_on> is <NR1 numeral response data> format.
0 and 1 denote OFF and ON respectively.
<Numerical program data>
0
1 (Excluding 0)
65