Main Related Commands - Iwatsu VOAC760 Manual

3.7.2 MAIN related commands

The following describes the commands having the header :MAIN.
It sets/reads out the measurement function currently used for measurement.
Syntax Parameter
Control system
:FUNC[?] Only
DCV|ACV|DCA|ACA|OH
M|O4W|CONT|DIOD|TE
MP|FREQ
commands support the
following:
DCI|ACI|RES|FRES
:DATA? XNOW|MAX|MIN|AVER|
SIG
:MEAS? XNOW|MAX|MIN|AVER|
SIG
Setting system
:RANG
:AUTO[?] OFF|ON or 0|1
:VAL[?] <Numerical program
data>
:REL
:STAT[?] OFF|ON or 0|1
:XREF[?] <Numerical program
data>
:XINI
:AVG
:STAT[?] OFF|ON or 0|1
:NUMB[?] <Numerical program
data>
:INIT
:CONT
:STAT[?] OFF|ON or 0|1
:RTH <Numerical program
data>
Function
Setting/reading of measurement
function
Reading of the latest measurement
result
Reaeding of measurement result
corresponding to trigger
Range-related
Setting/reading of auto range
ON/OFF
Setting/reading of range
Difference calculation related
Setting/reading of ON/OFF
Setting/reading of standard value
Standard value initialization request
Moving average (Smoothing)
calculation related
Setting/reading of ON/OFF
Setting/reading of sample counts
Initialization
Continuity test related
Setting/reading of ON/OFF
Setting/reading of threshold value
210
Remark
For parameter, see Section 3.7.4 .
<Numerical program data> cannot
be accepted.
It is only VOAC7602 to be able to
set "TEMP" to the parameter of
the command. It becomes an
execution error for VOAC7502.
Can be used by FREQ.
Can be used by FREQ.
Measurement range not
measurement current for DIOD
(1.0V fixed). Measurement current
cannot be set.
Sensor type for TEMP. For details,
see Section 3.7.8 About
temperature measurement
For CONT/DIOD, command/query
results in execution error
Max sample count is 100.
Command always results in
execution error.
Query response is ON if
measurement function is CONT;
OFF for others.
Max. of threshold value is 1000Ω.