3.5.14.2
SETUP:LOAD:DIRectory command/query
This sets and reads out the directory name when recalling the setup from file in USB memory.
Command syntax
:SETUP:LOAD:DIRectory <directory>
<directory>
<Character program data>
・Usable character
Alphanumeric character - !#$%&'()-@^_{}~"
・Maximum 8 characters
・Enclose by single quotation ( ' ) or
double quotation ( " )
Please refer to section 3.2 for the details of <Character program data>.
Query syntax
:SETUP:LOAD:DIRectory?
Response message <directory>
<directory> is <character response data> format.
Remark
SETUP:LOAD:DIRectory command/query is effective only for VOAC7602. It becomes a command
error for VOAC7502.
3.5.14.3
SETUP:LOAD command
This recalls the setup from the file in USB memory.
Command syntax
:SETUP:LOAD <filename>
<filename>
<Character program data>
・Usable character
Alphanumeric character - !#$%&'()-@^_{}~"
・Maximum 8 characters
・Enclose by single quotation ( ' ) or
double quotation ( " )
Please refer to section 3.2 for the details of <Character program data>.
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Remark
SETUP:LOAD:DIRectory command/query is effective only for VOAC7602. It becomes a command
error for VOAC7502.
Setting
Specifies file name to be
stored to USB memory.
Directory should be specified
by SETUP:LOAD:DIRectory
command.
185