3.5.3.7.3
CALCulate2:TRANsform:TCHart:RANGe[:UPPer] command/query
This sets and reads out range of the trend chart display.
Command syntax
:CALCulate2:TRANsform:TCHart:RANGe[:UPPer] {<range_data>|MIN|MAX|DEF}
<range_data>
<Numerical program data>
1.0E-12 to 500E+12
Numerical value beyond limit is set by rounding up maximum value/minimum value, and becomes
execution error.
Values except specified values are rounded up in larger values. This does not become execution
error.
The range mode of trend chart display is automatically set to MANUAL.
Query syntax
:CALCulate2:TRANsform:TCHart:RANGe[:UPPer]? [{MIN|MAX}]
Response message <range_data>
<range_data> is <NR3 numerical response data> format.
When the range mode has been set to exception of MANUAL, it becomes execution error and
returns 9.91E 37.
3.5.3.7.4
CALCulate2:TRANsform:TCHart:RANGe:OFFSet[:DIV] command/query
This sets and reads out range offset value of the vertical axis in the trend chart display in DIV unit.
Command syntax
:CALCulate2:TRANsform:TCHart:RANGe:OFFSet[:DIV] {<offset_div>|MIN|MAX|DEF}
<offset_div>
<Numerical program data>
-100,000 ~ +100,000
Numerical value beyond limit is set by rounding up maximum value/minimum value, and becomes
execution error.
The range mode of trend chart display is automatically set to MANUAL.
Query syntax
:CALCulate2:TRANsform:TCHart:RANGe:OFFSet[:DIV]? [{MIN|MAX}]
Response message <offset_div>
<offset_div> is <NR1 numerical response data> format.
When the range mode has been set to exception of MANUAL, it becomes execution error and
returns 9.91E 37.
Resolution
Default value
1,2 and 5 steps
1.0
Resolution
Default value
1
0
77