Calculate2:Transform:tchart:range:offset:value Command/Query - Iwatsu VOAC760 Manual

3.5.3.7.5

CALCulate2:TRANsform:TCHart:RANGe:OFFSet:VALue command/query

This sets and reads out range offset value of the vertical axis in the trend chart display.
Command syntax
:CALCulate2:TRANsform:TCHart:RANGe:OFFSet:VALue {<offset_data>|MIN|MAX|DEF}
<offset_data>
<Numerical program data>
±100,000 × <range>
In the table above, <range> is the range set value of the trend chart display.
Setting of this command is done after conversion in DIV unit. Therefore, the value is rounded to
the integral multiplication of the range set value in the trend chart.
Values out of range are rounded to a maximum/ minimum value; resulting in execution error.
The range mode of trend chart display is automatically set to MANUAL.
Query syntax
:CALCulate2:TRANsform:TCHart:RANGe:OFFSet:VALue? [{MIN|MAX}]
Response message <offset_data>
<offset_data> is <NR3 numerical response data> format.
When the range mode has been set to exception of MANUAL, it becomes execution error and
returns 9.91E  37.
Resolution Default value
1 × <range> 0
78