Calculate Subsystem; Calculate1:Limit Subsystem; Calculate[1]:Limit:lower:state Command/Query - Iwatsu VOAC760 Manual

3.5.3

CALCulate subsystem

This performs various setting of operation relations such as scaling and statistic calculation.
CALCulate1:LIMit
CALCulate1:SMOothing
CALCulate1:SCALe
CALCulate1:DB
CALCulate1:AVERage
CALCulate2:TRANsform:HISTogram
CALCulate2:TRANsform:TCHart
CALCulate2:TRANsform:METEr
3.5.3.1

CALCulate1:LIMit subsystem

3.5.3.1.1

CALCulate[1]:LIMit:LOWer:STATe command/query

This performs setting/reading of ON/OFF of the lower limit judgment for limit function.
Command syntax
:CALCulate[1]:LIMit:LOWer:STATe <off_on>
<off_on>
<Character program data>
OFF
ON
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
:CALCulate[1]:LIMit:LOWer:STATe?
Response message <off_on>
<off_on> is <NR1 numerical response data > format.
0 and 1 denote OFF and ON respectively.
<Numerical program data>
0
1 (Excluding 0)
58