System:datetime Command/Query - Iwatsu VOAC760 Manual

3.5.10.10

SYSTem:DATEtime command/query

This sets and reads out the current date and time.
Command syntax
:SYSTem:DATEtime <day>,<month>,<year>,<hour>,<min>,<sec>
Parameter
<day>
<month>
<year>
<hour>
<min>
<sec>
Numerical value beyond limit is set by rounding up maximum value/minimum value, and becomes
execution error.
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
:SYSTem:DATEtime?
Response message <day>, <month>, <year>, <hour>, <min>, <sec>
Each parameter is <NR1 numerical response data> format.
Setting <Character program data>
Day 1 to 31
Month 1 to 12
Year 2000 to 2099
Hour 0 to 23
Minute 0 to 59
Second 0 to 59
177