3: Mechanical Installation; Overview; Install The Base - Electro Industries Shark 100S Installation & Operation Manual

3: Mechanical Installation

3.1: Overview

The Shark 100S meter can be installed on any wall See Chapter 4 for wiring
diagrams.
Mount the meter in a dry location, which is free from dirt and corrosive substances.
Recommended Tools for Shark 100S Installation
• #2 Phillips screwdriver
• Wire cutters

3.2: Install the Base

1. Determine where you want to install the submeter.
2. With the submeter power off, open the top of the submeter. Use the front cover
support to keep the cover open as you perform the installation (see Figure 3.1).
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
Front cover
support
Opened
Screw
Figure 3.1: Shark Submeter with Cover Open
3: Hardware Installation
Doc E145721
#
3 - 1