Ct Leads Pass Through (No Meter Termination) - Electro Industries Shark 100 Installation & Operation Manual

4.3: CT Leads Pass Through (No Meter Termination)

The second method allows the CT wires to pass through the CT Inputs without terminating at the
meter. In this case, remove the Current Gills and place the CT wire directly through the CT opening.
The opening will accomodate up to 0.177" / 4.5mm maximum diameter CT wire.
Current Gills
removed
e
Electro Industries/GaugeTech
CT Wire passing through meter
Figure 4.2: Pass-Through Wire Electrical Connection
Doc #: E145701
4-3