Table of Contents
Advertisement
6.2.5.1: Configuring the Scroll Feature
When in Auto Scroll mode, the meter performs a scrolling display, showing each parameter for 7 seconds, with a 1
second pause between parameters. The parameters that the meter displays are determined by the following
conditions:
• They have been selected through software. (Refer to the
• They are enabled by the installed V-Switch. Refer to Section 2.1.3 for information on V-Switches.
To enable or disable Auto-scrolling:
1. Press the Enter button when SCrl is in the A window.
The Scroll YES screen appears.
2. Press either the Right or Down button if you want to access the
Scroll no screen.
To return to the Scoll YES screen, press either button.
3. Press the Enter button on either the Scroll YES screen (to enable auto-scrolling) or the Scroll no screen
(to disable auto-scrolling).
The CT- n screen appears (this is the next Configuration mode parameter).
NOTE:
• To exit the screen without changing scrolling options, press the Menu button.
• To return to the Main Menu screen, press the Menu button twice.
• To return to the scrolling (or non-scrolling) parameters display, press the Menu button three times.
e
Electro Industries/Gauge Tech
Communicator EXT User's Manual
Doc# E149701
for instructions.)
6-6
Advertisement
Table of Contents
