D: Dnp 3.0 Protocol Assignments; D.1: Dnp Implementation - Electro Industries Shark 100S Installation & Operation Manual

D: DNP 3.0 Protocol Assignments

D.1: DNP Implementation

PHYSICAL LAYER
The Shark® 100S meter can use RS485 as the physical layer. This is accomplished by
connecting a PC to the meter using the meter's RS485 connection (see Chapter 5).
RS485
RS485 provides multi-drop network communication capabilities. Multiple meters can
be placed on the same bus, allowing for a Master device to communicate with any of
the other devices. Appropriate network configuration and termination should be
evaluated for each installation to insure optimal performance (see Chapter 5).
Communication Parameters
Shark® 100S meters communicate in DNP 3.0 using the following communication
settings:
• 8 Data Bits
• No Parity
• 1 Stop Bit
• Baud Rates: 9600, 19200, 38400, 57600
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
D: DNP 3.0 Protocol Assignments
Doc E145721
#
D - 1