Table of Contents
Advertisement
7.3.3.2: Program Configuration Mode Screens
To program the screens in Configuration Mode, other than SCROLL:
1. Push DOWN or RIGHT button (Example Ct-n screen below).
2. The Password screen appears, if Enabled (see section 5.22). Use the DOWN and RIGHT buttons
to enter the PASSWORD. See section 7.3.2.1 for all Password steps.
Once the correct password is entered, push ENTER. The Ct-n screen reappears. The Program
(PRG) LED flashes on the left side of the meter face.
The first digit of the setting will also flash.
3. Use the DOWN button to change the digit.
Use the RIGHT Button to move to the next digit.
4. When the new setting is entered, push MENU twice.
The STORE ALL screen appears.
e
Electro Industries/GaugeTech
5. Use the RIGHT Button to scroll
from YES to no.
6. While in STORE ALL YES, push
ENTER to change the setting.
Store All Done appears.
Then, the meter RESETS.
Doc #: E145701
7-5
Hide quick links:
Advertisement
Table of Contents
