Safe Title Settings - Sony DVS-7300 System User Manual

Safe Title Settings

Overview
The safe title display provides an indication on a monitor of the maximum
area in which it is safe to put titling, to guarantee that it can be seen on a
domestic television.
This function provides two different indications, a box outlining the safe title
area, and a cross indicating the center of the screen, and you can select either
or both, and also adjust the dimensions of the box indication in a setup menu.
For details of the safe title settings in the setup menu, see page 13-46.
Enabling and disabling the safe title display
Use the following procedure to enable and disable the safe title display.
1
2
12-8
Chapter 12 MISC Menu Operations
In the MISC menu, select item 2 (SAFE TITLE).
The SAFE TITLE menu appears.
SAFE TITLE
DSK
SWER EDIT
PGM PVW 1
OFF OFF OFF
F1 F2 F3
Function key indications in the SAFE TITLE menu
Press any of F1 to F6, toggling the safe title display on or off on the
respective video output.
F1 (SWER PGM): final program output of the switcher (video output
from the PGM OUTPUTS connectors on the rear panel of the
switcher)
F2 (EDIT PVW): edit preview output of the switcher (video output
from the EDIT PVW OUTPUT connector on the rear panel of the
switcher)
F3 (DSK1): DSK1 program output (video output from the DSK1 PGM
OUTPUTS connectors on the downstream keyer)
F4 (DSK2): DSK2 program output (video output from the DSK2 PGM
OUTPUTS connectors on the downstream keyer)
DSK DSK DSK
2 3 4
OFF OFF OFF
F4 F5 F6 F7 F8 F9 F10