Setting The Edit Points - Sony DVS-9000 User Manual

Setting the Edit Points

To set the edit points, use any of the following operations in the keyframe
control block.
• To move the edit point to the keyframe immediately after the current time
(the position at which the effect is currently stopped), press the [NEXT KF]
button.
• To move the edit point to the keyframe immediately before the current time,
press the [PREV KF] button.
• To move the edit point to a keyframe specified by number, press the [GO TO
KF] button, then enter the keyframe number with the numeric keypad in the
numeric keypad control block, and press the [ENTER] button to confirm.
• To move the edit point to a specified timecode, press the [GO TO TC] button,
then enter the timecode value with the numeric keypad in the numeric
keypad control block, and press the [ENTER] button to confirm.
To enter a difference value
When moving to a point specified with the [GO TO KF] button or [GO TO TC]
button, you can also enter the difference from the current keyframe number or
timecode value.
STOP
EFF
NEXT
LOOP
KF
NORM REV
NORM
FF
/REV
RE
WIND
RUN
Keyframe control block
EDIT ENBL button
CONST DUR button
EDIT
ENBL
KF EFF TURN KF
DUR DUR OVER LOOP
CONST AUTO GO TO
DELAY
DUR INS TC
COPY PASTE ALL
DEL MOD UNDO
PREV
SHIFT INS
KF
Buttons used for editing
Specifying the Region and Edit Points
PAUSE
GO TO
KF
FROM
TO
NEXT
KF
189