Maintenance - Nortel CS 1000 Manual

254 Location builder tool
17
18

Maintenance

You can change the Location configuration after you create the Location
file, for example:
•
You can make minor configuration changes, excluding RPNadm
data. To make minor changes in the configuration, you can import
To manually add a DAP, right-click a point on the Map, and
select Add DAP from the menu.
The Add DAP dialog box appears.
The RPN and Info values are automatically filled in. Ensure that
the values are correct, and click OK.
A DAP is created at the position you specified in the Add DAP
dialog box.
Select one or more of the following options.
•
Choose File > Save to save the location file as an .xml file.
You can later import this file into the DAP Sync Analyzer tool.
•
Export the location file as a .csv file for use in the DAP Sync
Analyzer. This file does not contain building information. This
.csv file contains DAP information only.
•
Export the Dummy visibility file as a .txt file. This creates a
flat synchronization hierarchy. Use the .txt file only if you
cannot obtain a realistic visibility file.
•
Export the RPNadm file as a .txt file. This file contains the
RPN data that you configured in the Location Builder tool.
Normally the RPNadm file contains the RPN information from
the imported RPNadm.txt file.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--