Nortel CS 1000 Manual page 260

260 Site survey example
5
6
7
8
Identify existing cabling
Gather the following information and enter it into the work order.
Procedure 143
Identifying existing cabling
Step
1
2
3
Assess radio coverage
If the customer requires the basestations be installed out of sight, this can
reduce the coverage capability of each basestation. Obstacles can limit
the performance of the system and increase costs.
Gather the following information and enter it into the work order.
Procedure 144
Assessing radio coverage
Step
1
2
If the building contains atriums, multiple floors, or floors not
all the same shape or unusual conditions, see
multiple floors" (page
Record the height of floors.
Record as much information as you can obtain about the
partitioning of floors.
Discuss and record the details of furniture, cupboards, and
machinery in the interior of buildings on every floor.
Ask about other building details as necessary and record this
information.
Action
Obtain the location of the telephone switching room.
Determine the total length of the existing cable.
Ask about the existing cabling from the DAPs to the IP Switch.
The wiring from the DAPs to the IP Switch must be at least UTP
Cat 5.
Action
Record areas where radio coverage is required.
Record areas where radio coverage is not required.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
59).
--End--
--End--
"Deploying on