Nortel CS 1000 Manual page 45

As shown in Figure 16 "Cell boundary terminology" (page
boundary is the farthest point from the cell center where a clear radio
signal can be heard.
Determine the range from the cell center to the cell boundary, or the
distance to a potential cell center from a critical point, by using the cell
boundary value and the deployment tool.
ATTENTION
Close all doors, and hold the survey handset about 1.2 m above the ground.
Figure 16
Cell boundary terminology
Determine a cell boundary for the cell center by placing the deployment
tool at the cell center and using the deployment handset to establish the
cell boundary.
Mark the cell contour based on the most distant point.
Procedure 4
Demarcating the cell contour for the critical point farthest from the center of
the full coverage area
Step Action
1 Set up the deployment tool basestation. Raise the deployment
tool basestation as high as possible, or until it is at the height
recommended for basestations.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
System deployment 45
45), the cell