Nortel CS 1000 Manual page 228

228 System maintenance
Menu Contains these options
--Red
= Green
X Red
•
Print to send the Tree view to a printer.
•
Exit to exit from the program.
•
View Problems to select the problem view, which is the default view. A number
of potential problems, such as DAPs that can synchronize with only one
other DAP, are defined in the program and indicated in the tree view by an
exclamation mark.
•
Synchronization to select the synchronization view, which shows the
synchronization path of the selected DAP. One of the following symbols
appears next to each DAP in the tree view.
Symbol
+ Blue
+ Red
+ Purple
•
New Master to configure the currently selected DAP as cluster master in the
tree view.
•
Best Master to calculate what DAP is best suited to be the master.
•
Expand All to expand all entries in the tree view.
•
Collapse All to collapse all entries in the tree view.
•
Location to open a specific Location file in the Location page.
•
Settings to open the Settings page, where you can enter the RSSI threshold
and the Phase Difference threshold.
•
Tools Track Portable to open a traffic bearer file in the Portable Tracking page.
•
Help Help to access Help features.
Synchronization Analyzer Location page
Use the Location page to display a visual representation of the DAP
locations in the system.
The current level of an RPN is lower that the one in file
loaded for comparison.
The current level is the same as the compared level.
This DAP does not exist in the file that you loaded for
comparison.
Meaning
The selected DAP sees this DAP.
The selected DAP is synchronized on this DAP.
The selected DAP sees and synchronizes on this DAP.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.