Nortel CS 1000 Manual page 55

2
3
Figure 24
Identify new critical points (P11, P12, P13, P14, P15, P16, P17)
Mark additional cell boundaries and define the extent of the coverage area.
Procedure 14
Demarcate additional cell boundaries to cover all areas of the building
Step
1
The critical points must be as follows.
Mark critical points inside of where the cell boundary meets the
outside wall (P12, P13, P14, and P15 in
critical points (P11, P12, P13, P14, P15, P16, P17)" (page
and
Mark critical points where cell boundaries meet (P16 and P17 in
Figure 24 "Identify new critical points (P11, P12, P13, P14, P15,
P16, P17)" (page
Action
Repeat the procedures
on the floor" (page 44)
new critical points" (page 52)
boundaries at the middle of the building.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
55).
--End--
Procedure 3 "Identifying critical points
to Procedure 10 "Marking and labeling
as necessary to mark new cell
System deployment 55
Figure 24 "Identify new
55),