Nortel CS 1000 Manual page 258

258 Site survey example
•
•
Gather survey items
Obtain the following items before you start the site survey. The items are
not customer supplied.
•
Pick up the DECT tool kit (consisting of tripod and deployment tool kit).
•
Get the appropriate DECT provisioning record.
•
Gather a pencil, an eraser, a ruler, and colored pencils.
Identify site contacts
Gather the following information and enter it into the work order and the
provisioning records. The installer requires the following information.
Procedure 140
Identifying site contacts
Step
1
2
3
4
5
6
7
8
9
10
Obtain site plans
Obtain two scaled plans. You need a scale to check wiring distances from
the controller to the basestations. The scale is in the form of a measured
line so it remains in proportion to the floor plan through reduction copiers.
"Identify existing cabling" (page 260)
"Profile handset use" (page 261)
Action
Record company name.
Record the company address.
Record the contact name.
Record the contact telephone number.
Obtain and record scheduling times and date.
Obtain access to controlled areas.
Obtain keys or codes you need for secured site areas where
radio coverage is required.
Obtain and record additional contact information, if required.
Obtain the safety equipment you require, such as a hard hat or
safety glasses.
Record information regarding existing DECT systems in the radio
coverage area.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--