Nortel CS 1000 Manual page 166

166 SIPL configuration
2
3
4
5
6
In the Predefined SIP Server configurations list, select Nortel.
In the SIP Domain field, enter the domain name.
The SIP domain you enter here must be the same as the SIP
domain name you enter as the domain in SIP LINE Gateway, in
"SIP Line Gateway configuration" (page
Click Proxy IP to use SIP Line Gateway as Registrar.
This option is not available if your system uses Multiple
Gatekeepers.
Configure the following values for Authentication Realm 1:
•
In the Authentication Realm 1 field, enter the domain name
(capital letters)
•
In the User field, enter %s
•
In the Pswd field, enter %s
The password is encrypted, and does not appear in a readable
form if you reopen the SIP settings tab.
To change the password, enter a new value in the Pswd field,
save the system, and restart all connected DAPs.
Configure the following:
•
Check use_registrar=yes.
•
Check redirect=no.
•
Check multiple_sip_ports=yes.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
177).