Nortel CS 1000 Manual page 121

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 121
Restarting DECT Access Points
You must restart DECT Access Points (DAP) after software upgrades.
Restart a DECT Access Point
Procedure 54
Restarting DECT Access Points
Step Action
1 Start DAP manager by entering the following URL into an
internet browser: localhost/cds
The DAP manager IP DECT page appears.
2 Select Access Points from the menu on the left.
The Access Points page appears information about the DAPs.
DECT Access Points are identified by their Radio Part Number
(RPN). In the work space, the DAP Manager shows the status of
the present DAPs. You can modify the RPN of a DAP by editing
the RPN field.
In the DAP manager task area, choose one of the following
options.
•
Reboot—Select this option to restart a selected DAP.
•
Reboot All—Select this option to restart all DAPs in the list.
•
Delete—Select this option to remove a DAP from the list.
The DAP takes a few minutes to restart.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.