Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 133
NRS configuration
Log on to the Network Routing Service manager (NRS).
Procedure 70
Logging on to NRS
Step
Action
1
Log on to Unified Communications Management, and then log
on to Element manager.
2
Select Dialing & Numbering plans > Network Routing
Service.
3
Enter the TLAN address of the Signaling Server.
4
Click Next.
Perform the following procedures to configure the NRS.
•
Procedure 71 "Creating service domain" (page 134)
•
Procedure 72 "Adding the UDP domain" (page 135)
•
Procedure 73 "Adding the CDP domain" (page 135)
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
--End--
--End--