Sipl Configuration; Navigation; Basic (Simple) Sip Dect Configuration With Cs 1000 Sip Line Gateway; Configuration Using Ip Dect Configurator - Nortel CS 1000 Manual

.
SIPL configuration
This section contains information about creating a SIP LINE (SIPL)
configuration. This is the SIP connection method used under
Communication Server Release 6.0.

Navigation

•
"Basic (simple) SIP DECT configuration with CS 1000 SIP Line
Gateway" (page 159)
•
"Routed Head Quarter configuration" (page 182)
•
"Multiple-site mobility network configuration" (page 187)
Basic (simple) SIP DECT configuration with CS 1000 SIP Line
Gateway
To configure the SIP DECT system, you must configure the following
three components: the Call Server, the SIP LINE Gateway, and the DAP
manager. Use the DAP manager to configure and monitor DAPs.
Use the following tools to configure a SIP DECT system:
•
Element manager or overlay program for Call Server
•
IP DECT Configurator and DAP manager IP DECT, which are available
as a part of the DAP controller software package
Configuration using IP DECT Configurator
Use the IP DECT Configurator tool to create configuration files for the DAP
controller and DAPs. The IP DECT Configurator is installed and starts
automatically with the installation of the DAP controller software. The IP
DECT Configurator can also be started using the shortcut to the IP DECT
Configurator tool under the Start menu at Programs > DAP controller >
DAP Applications.
For information about IP DECT Configurator installation, see
"Installing the DAP Controller" (page
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
103)Installing the DAP Controller.
159
Procedure 42