164 SIPL configuration
2
3
4
Select the network card that is connected to the SIP DECT
system.
Select the Run TFTP server on this PC check box, and choose
one of the following options:
•
If you use a Microsoft Windows TFTP server, selectWindows
TFTP server on this PC.
OR
•
If you use a built-in TFTP server, select 3com TFTP server
on this PC.
Configure the DHCP server.
•
If you use a Microsoft Windows DHCP server, click Apply.
OR
•
If you use a built-in DHCP server, see Built-in DHCP server.
ATTENTION
If you plan to create a configuration without DHCP and TFTP servers,
see Configuration without DHCP or TFTP.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.