Nortel CS 1000 Manual page 50

50 Site planning and hardware deployment
Figure 20
Example of a cell center boundary
Mark and label the cell boundary.
Procedure 8
Marking and labeling the cell boundary on the floor plan
Step
1
2
3
4 until there you have sufficient Xs so you can draw a contour
arc around the cell center.
For an example of a cell boundary, see
cell center boundary" (page
Action
Mark each office within the cell that is isolated from the office
area.
Label subsequent critical points on the floor plan with the
following symbol.
Mark the cell contour on the floor plan by tracing a contour line
through the Xs with a marker.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
Figure 20 "Example of a
50).
--End--