Nortel CS 1000 Manual page 176

176 SIPL configuration
2
3
4
5
Select the required available extension number or numbers.
If the required number is not visible, select another page.
The page number appears in the top and bottom rows of the
subscriptions table.
Click Enable.
ATTENTION
If you plan to create a multiple-site configuration, use the option
Enable for Multi-Site instead of Enable.
The status of the subscription record changes from Free to
Enabled and the Personal Identification Number (PIN) appears.
The DAP manager generates a PIN when it performs each
subscribe operation; the PIN appears only when the subscription
status is Enabled.
You can disable or remove subscriptions. For information about
subscription management, see
(page 193).
A DECT handset is required for the remainder of this procedure.
Find System configuration in the DECT handset menu.
Choose New, and enter the displayed PIN code.
Sometimes you must enter PARK code first. The PARK code
appears on the left at the bottom of the Subscriptions page.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
"Subscription management"