Nortel CS 1000 Manual page 162

162 SIPL configuration
Procedure 87
Adding a new system using the IP DECT Configurator
Step
1
2
1. The top pane shows the Settings buttons.
2. The left pane shows the System Control buttons.
3. The middle pane shows the information.
Action
In the IP DECT Configurator main window, click New System in
the System Control settings pane.
The General settings page appears.
Enter the System name, for example, System_1.
Use no special characters in your SIP DECT system name. The
folder and the SIP DECT system share the same name.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--