Nortel CS 1000 Manual page 53

Procedure 11
Demarcating new cell contours, a new center and a new cell boundary
Step
1
Figure 22
Example of deployment for cell center 1C2
Mark cell contours, centers, and boundaries at the far end of the intended
coverage area.
Action
Using the critical points from
points" (page 51), mark new cell contours, a new cell center and
a new cell boundary.
For more information, see
contour for the critical point farthest from the center of the full
coverage area" (page 45)
boundary" (page 49).
Cell contour arcs must pass near the cell boundary of adjacent
cells. For an example, see
for cell center 1C2" (page
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
System deployment 53
Procedure 9 "Identifying new critical
Procedure 4 "Demarcating the cell
to Procedure 7 "Demarcating a cell
Figure 22 "Example of deployment
53).
--End--