Import And Export Subscriptions - Nortel CS 1000 Manual

188 SIPL configuration
Procedure 104
Subscribing a multi-site DECT handset
Step
1
2
3
4
5
6
7
8
9
10

Import and export subscriptions

Use the procedures in this section to import and export subscriptions.
Action
Open Internet Explorer and enter the following URL in the
address field: localhost/cds.
The DAP manager IP DECT page appears.
Click OK.
Enter the number range to define DNs for multi-site DECT
handsets, for example, from 5010 to 5020.
Select Subscriptions from the menu on the left in the DAP
manager IP DECT page.
The Subscriptions page appears.
Select extension numbers, for example, 5010. If the required
number is not visible, select another page. The page number
appears in the top and bottom rows of the subscriptions table.
Click Enable for Multi-Site.
The status of the subscription record changes from Free to
Enabled and the Personal Identification Number (PIN) appears.
The DAP manager generates a PIN when it performs each
subscribe operation; the PIN appears only when the subscription
status is Enabled.
Use a DECT handset to navigate to the System configuration
menu.
Choose New, and enter the displayed PIN code.
Sometimes you must enter the PARK code first. The PARK code
appears on the left at the bottom of the Subscriptions page. If
you do not enter the PIN within 16 minutes, the subscription
mode terminates for that specific extension number and you
must start the subscription process from the beginning.
Enter the name of your SIP-DECT system and the DN that
appears on handset display.
The status of the configuring subscription record changes from
Enabled to Subscribed.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--