Nortel CS 1000 Manual page 111

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 111
2 In the Multicast address field, enter 239.192.49.49.
3 Enter the DAP controller Configuration: DC IP address, which
is the IP address of the PC on which your DAP controller is
installed. An example of this address is 192.168.100.10.
ATTENTION
The DAP Controller PC must have a static IP address and be in the
same subnet as the DAPs. If the DAP Controller PC is in a different
subnet, you must configure the Routed Head Quarter. For more
information, see
4 Enter the Proxy IP address, which is the Signaling Server Node
IP address, for example, 192.168.100.105.
5 Click Apply.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
"Routed Head Quarter configuration" (page
--End--
146).