160 SIPL configuration
Use the following procedures to configure the settings in the IP DECT
Configurator.
•
Procedure 86 "Starting the IP DECT Configurator" (page 160)
•
Procedure 87 "Adding a new system using the IP DECT Configurator"
(page 162)
•
Procedure 88 "Configuring IP Settings" (page 163)
•
Procedure 89 "Configuring Network Settings" (page 163)
•
Procedure 94 "Configuring other settings—Performance/Email
Settings" (page 169)
•
Procedure 95 "Configuring other settings—Customer Information
settings" (page 171)
•
Procedure 96 "Saving the system" (page 172)
•
Procedure 97 "Enabling or re-enabling the DAPs" (page 173)
Procedure 86
Starting the IP DECT Configurator
Step
1
Action
Select Start > Programs > DAP controller > DAP Applications
> DAP Configurator.
The IP DECT Configurator window appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.