Multiple-Site Mobility Network Configuration; Subscribe A Multi-Site Dect Handset - Nortel CS 1000 Manual

7
8
9
10
Multiple-site mobility network configuration
A multiple-site mobility network makes it possible to use portable DECT
handsets on various MCDN nodes with installed SIP DECT systems. It is
possible for only one subscription to be in the handset for all SIP DECT
systems when you use SARI. In this case SARI on all SIP DECT systems
must be the same.
ATTENTION
When the handset is on a remote MCDN node, the ring back tone is given to a
party calling the local DN even if the handset is busy.
ATTENTION
Before starting multi-site Configuration, perform the following steps:
•
Configure SIP Line and provide the required configuration for SIP DECT on
Call Server (UEXT blocks) on each MCDN node selected for MSMN.
•
Create any type of SIP DECT configuration on each MCDN node selected for
MSMN.
•
Connect the systems configured for MSMN through trunks. Configure the
uniform (UDP) or coordinated (CDP) numbering plan.
The following topics are described in this section.
•
"Subscribe a multi-site DECT handset" (page 187)
•
"Import and export subscriptions" (page 188)
•
"Personal Call Assistant configuration" (page 189)

Subscribe a multi-site DECT handset

Subscribe a multi-site DECT handset.
Go to step 7.
Click Save System and deactivate the system.
Ensure DHCP and TFTP servers are configured properly, so that
DAPs can start in all Branch Offices.
Activate the system and restart all DAPs.
Start DAP Manager, open Access Points page and ensure all
DAPs are present and working.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.

Multiple-site mobility network configuration 187

--End--