Nortel CS 1000 Manual page 170

Sip dect fundamentals
Hide thumbs Also See for CS 1000:
Table of Contents

Advertisement

170 SIPL configuration
3
4
5
6
7
8
9
10
11
12
13
This interval specifies how often User Performance
Measurement files are generated.
Enter a value in Interval EPM generation every _____ minutes
or accept the default of 15 minutes.
This interval specifies how often Equipment Performance
Measurement files are generated.
Enter a value next to Start measurement at with the time you
want performance measurement to start each day.
Enter a value next to Stop measurement at with the time you
want performance measurement to stop each day.
Under Create performance counters every, select the check
boxes under the days of the week you want performance counter
retrieval to occur.
In the field Keep Performance data for _____ days fill in the
number of days you want the performance data stored on the
hard disk.
Click More to access Advanced Email Settings.
In Advanced Email Settings, Enter a value next to SMTP
Server with the DNS name or the IP address of your SMTP mail
server.
With Advanced Email Settings, email messages can be sent
automatically if a DAP fails or if the channel occupation threshold
is exceeded for more than a specified number of seconds.
Automatic email messages can be sent only if the DAP controller
or manager is running, and the PCR service is running on the
DAP controller or manager PC.
If you enter the DNS name of your SMTP Server, ensure that
the DNS server address is configured for the network connection
on the DAP Controller.
Select the Send alarm emails check box , which enables SIP
DECT to send email messages to the SMTP Server.
Fill the field next to Email addresses with one or more
destination email addresses.
Enter a value next to Email from with the email address of the
originator.
Normally, the SMTP server does not verify the email address of
the originator. This means you can enter any email address in
this field.
Fill in the two boxes after Channel Occupation. In the
Threshold box, specify the percentage. In the Time box, specify
a time in seconds.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.

Advertisement

Table of Contents
loading

Table of Contents