Nortel CS 1000 Manual page 117

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 117
2 In Performance Settings, under Performance Counters
Configuration fill the field in Interval UPM generation every
_____ minutes or accept the default of 1440 minutes, which
equals one day.
This interval specifies how often User Performance
Measurement files are generated.
3 Enter a value in Interval EPM generation every _____ minutes
or accept the default of 15 minutes.
This interval specifies how often Equipment Performance
Measurement files are generated.
4 Enter a value next to Start measurement at: with the time you
want performance measurement to start each day.
5 Enter a value next to Stop measurement at: with the time you
want performance measurement to stop each day.
6 Under Create performance counters every, select the check
boxes under the days of the week you want performance counter
retrieval to occur.
7 In the field Keep Performance data for _____ days fill in the
number of days you want the performance data stored on the
hard disk.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.