Nortel CS 1000 Manual page 109

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 109
Procedure 43
Starting the IP DECT Configurator
Step Action
1 Select Start > Programs > DAP controller > DAP Applications
> DAP Configurator.
The IP DECT Configurator window appears.
If your network card does not have a fixed IP address, the
following error message appears after the application starts.
To correct this error, assign a fixed IP Address to the network
card in your DAP controller PC and restart the application.
The IP DECT Configurator main window shown in SIP DECT
configuration has three panes:
1. The top pane shows the Settings buttons.
2. The left pane shows the System Control buttons.
3. The middle pane shows the information.
Procedure 44
Adding a new system using the IP DECT Configurator
Step Action
1 In the IP DECT Configurator main window, click New System in
the System Control settings pane.
The General settings page appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--