Routed Head Quarter Configuration With Branch Office - Nortel CS 1000 Manual

148 SIPN configuration
7
8
9
10
Routed Head Quarter Configuration with Branch Office
Use Routed Head Quarter Configuration with Branch Office to create a
Routed Head Quarter Configuration in one of the branch offices. Within the
Branch Office with Routed Head Quarter, DAPs belong to various subnets
and behave as a single site of one SIP DECT system with the full support
of seamless handover. As for the whole SIP DECT system, each Branch
Office (including the Branch Office with Routed Head Quarter) behaves
as isolated site of that SIP DECT system. Branch Office configuration
Click Save System, and deactivate the system.
Ensure that DHCP and TFTP servers are configured so that
DAPs can start in all subnets.
Activate the system and restart all DAPs.
Start DAP Manager, open Access Points page and ensure that
all DAPs are present and working.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--