Configuration Using Ip Dect Configurator - Nortel CS 1000 Manual

108 SIPN configuration
•
DAP IP address: 192.168.100.200
•
PC IP Address where the DAP controller is installed: 192.168.100.10
•
Customer: 0
•
D-Channel: 5
•
Route: 6
•
Access Code: 9
•
Location code: 442
•
SIP Route ACOD: 6
•
SIP domain name: mera.ru
•
Signaling Server host name: 1155
Configuration using IP DECT Configurator
Use the IP DECT Configurator to create configuration files for the DAP
controller and DAPs. The IP DECT Configurator is installed and starts
automatically with the installation of the DAP controller software. You can
also start the IP DECT Configurator using the shortcut to the IP DECT
Configurator tool found under the Start menu at Programs > DAP controller
> DAP Applications.
For more information about IP DECT Configurator installation, see
Procedure 42 "Installing the DAP Controller" (page
Perform the following procedures to configure the settings in the IP DECT
Configurator.
•
Procedure 43 "Starting the IP DECT Configurator" (page 109)
•
Procedure 44 "Adding a new system using the IP DECT Configurator"
(page 109)
•
Procedure 45 "Configuring IP Settings" (page 110)
•
Procedure 46 "Configuring Network Settings" (page 112)
•
Procedure 50 "Configuring other settings—Performance/Email
Settings" (page 116)
•
Procedure 51 "Configuring other settings—Customer Information
settings" (page 119)
•
Procedure 52 "Saving the system" (page 119)
•
Procedure 53 "Enabling or re-enabling the DAPs" (page 120)
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
103).