Nortel CS 1000 Manual page 222

222 System maintenance
Procedure 130
Updating the DAP firmware
Step
1
2
3
4
5
CAUTION
Service loss during restart
During the DAP firmware update, you must restart the DAPs.
When you restart the DAPs, any DECT calls that are in progress
are dropped, and the SIP DECT system is not available to
handle calls until the DAPs finish restarting.
Action
Start IP DECT Configurator.
In the IP DECT Configurator main window, click General.
If you have more than one DECT system configured in IP DECT
Configurator, click Modify, and select the system you want to
update.
OR
If you have only one DECT system configured, proceed to
step 4.
In the General Settings window click Browse.
Browse to the folder where the new firmware (the DAP package
file) is stored, select the DAP package file, and click Open.
The new firmware information appears in the 4710 Package:
field.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.