Nortel CS 1000 Manual page 138

138 SIPN configuration
2
3
4
5
6
7
In the Limit results to Domain fields, enter information for the
existing service domain, EDP domain, and CDP domain.
In the Endpoint Name list, select a DAP endpoint.
In Routing Entries (X), click Add.
If you configured UDP, perform the following steps:
•
Select Private level 1 regional (UDP location code) for DN
type.
•
Enter the location code (LOC).
•
Enter question marks (?) equal to number of digits in DN
subscribed on the DAP.
For example, 442???? for DN Prefix and 1 for Route cost.
Click Save.
If you configured CDP, select Private level 0 regional (CDP
steering code) for DN type, enter the Trunk Steering code
(TSC) and question marks (?) equal to number of digits in DN
subscribed on DAP, for example, 44????. Click Save.
If you plan to create a Branch Office Configuration, see
configuration on NRS" (page 145)
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
.
--End--
"Perform