Subscribe A Multiple-Site Dect Handset; Import And Export Subscriptions - Nortel CS 1000 Manual

Subscribe a multiple-site DECT handset

Subscribe a multiple-site DECT handset.
Procedure 82
Subscribing a multiple-site DECT handset
Step Action
1 Open Internet Explorer and enter the following URL in the
address field: localhost/cds.
The DAP manager IP DECT page appears.
2 Click OK.
3 Enter the number range to define DNs for multiple-site DECT
handsets, for example, from 5010 to 5020.
4 Select Subscriptions from the menu on the left in the DAP
manager IP DECT page.
The Subscriptions page appears.
5 Select the required available extension number(s), for example,
5010. If the required number is not visible, select another page.
The page number appears in the top and bottom rows of the
subscriptions table.
6 Click Enable for Multi-Site.
The status of the configuring subscription record changes from
Free to Enabled and the Personal Identification Number (PIN)
appears. The DAP manager generates a PIN when it performs
each subscribe operation; the PIN appears only when the
subscription status is Enabled.
7 Use a DECT handset to navigate to the System configuration
menu.
8 Choose New and enter the displayed PIN code.
Sometimes you must enter the PARK code first. The PARK code
appears on the left at the bottom of the Subscriptions page. If
the PIN is not entered within 16 minutes, the subscription mode
is terminated for that specific extension number and you must
start the subscription process from the beginning.
9 Enter the name of your SIP-DECT system and the DN that
appears on handset display.
10 The status of the configuring subscription record changes from
"Enabled" to "Subscribed".

Import and export subscriptions

Use the procedures in this section to import and export subscriptions.
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
Multi site mobility network configuration 151
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
--End--