Nortel CS 1000 Manual page 90

90 Software requirements
10
Procedure 36
Configuring the Settings for SIP DECT
Step
1
2
3
4
5
Close the Add/Remove Programs window and close the
Control panel window.
Action
Start the DHCP manager: Start > Programs > Administrative
Tools > DHCP.
The DHCP Administration Tools window appears.
Select the active DHCP server and create a new scope: Action
> New Scope.
The New Scope Wizard starts.
Click Next in the wizard dialog box.
Enter a name and description for the new scope, for example,
SIP DECT.
Click Next in the naming dialog box see the IP address range.
The window New Scope Wizard—IP address range appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--