How The Deployment Tool Works - Nortel CS 1000 Manual

3
4
5
6
7

How the deployment tool works

The deployment tool basestation and the deployment handset establishes
a radio link under the following circumstances:
•
the handset is in the deployment mode
•
the handset and basestation are within range of one another
The closer the handset is to the basestation the stronger the link. As the
handset moves away from the basestation, a point is reached where the
signal is no longer reliable for telephone conversations.
After a link is established, the handset emits a continuous 1.4 kHz tone
and displays an RSSI value.
Figure 44
Deployment handset link display
To select system mode, press the shift key and press the local
key.
SYSTEM appears on the handset display.
To select monitor mode, press the star (*) key.
MONITOR MODE appears on the handset display.
To select the monitor mode code, press the lock button. The
handset displays
CODE appears on the handset display.
To enter the monitor mode code, on the dial pad, enter 2530.
Press the Lock button.
Interpret the handset RSSI display and test tone.
See the explanation in
271) and "Using the deployment tool" (page
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
How the deployment tool works 271
"How the deployment tool works" (page
--End--
272).