Software Requirements; Navigation; Call Server, Signalling Server, And Sip Line Gateway Software; Dap Controller Software - Nortel CS 1000 Manual

.

Software requirements

Navigation

•
"Call server, signalling server, and SIP Line Gateway software" (page
79)
•
"DAP controller software" (page 79)

Call server, signalling server, and SIP Line Gateway software

For information about Call Server 1000E and Signaling Server installation,
see Communication Server 1000E Installation and Commissioning
(NN43041-310). For more information about SIP Line Gateway application
installation, see SIP Line Fundamentals (NN43001-508).

DAP controller software

This section contains the steps to configure the SIP DECT system. Before
you can use SIP DECT, you must install and configure the following
software on the DAP controller PC:
•
Microsoft Windows
You can install any of the following operating systems on the DAP
controller or manager PC.
—
—
—
—
This document does not provide the steps you must follow to install the
operating system. For information about installing Windows, see the
documentation that accompanied the Windows software.
Windows 2000 Professional or Windows 2000 Server Service Pack
4 (SP4)
Windows 2003 Server SP1 or SP2
Windows 2003 Release 2
Windows XP Professional SP2
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
79