Nortel CS 1000 Manual page 127

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 127
10 Select ISLD for MODE.
11 Select the DCH created previously, for example, 5.
12 Select SL1 for IFC and 1, for example, for the Private Network
Identifier (PNI).
13 Select the NCNA check box, and the INAC check box.
14 Select CDP for CTYP.
15 In Network Options select ESN5 for SIGO.
16 Click Submit.
Adding trunks
Add a trunk using Element manager.
Procedure 61
Adding a trunk
Step Action
1 Select System > Core Equipment > Superloops from the
menu.
2 On Superloops, select the superloop number (for example, 96),
and for type, select Virtual.
3 Click Add, and then click Save.
4 Select Routes & Trunks > Routes & Trunks from the menu.
5 On the Route & Trunks page click Customer: X.
The customer list expands and Route: Z appears.
6 Click Add trunks.
The Customer X, Route Z, New Trunk Configuration page
appears.
7 Select 32 for MTINPUT.
8 Select IPTI for TYPE.
9 Select VTRK for XTRK.
10 Enter the route number you configured previously and the route
member, for example, 6 1 for RTMB.
11 Select WNK both STRI/STRO and 1 for CHID.
12 Enter a terminal number (tn) for TN, for example, 96 0 0 0.
Refer to the superloop configured previously in this procedure.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--