Nortel CS 1000 Manual page 168

168 SIPL configuration
2
3
The following procedure applies to SIPL configurations only.
Procedure 93
Configuring other settings—PBX Settings
Step
1
Enter an eight-digit hexadecimal string for the Primary Access
Right Identity or PARI, for example, 1F12345A.
The worldwide unique PARI for your DECT system must be
issued by the European Telecommunications Standards Institute
(ETSI). For information, see www.etsi.org.
ATTENTION
Ensure you enter the correct PARI. You must reinstall the DAP
Controller software and resubscribe all DECT handsets if you change
the PARI.
Click Apply.
Action
In the Settings pane, click PBX Settings.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--