Multi Site Mobility Network Configuration - Nortel CS 1000 Manual

150 SIPN configuration
7
8
9
10
11
Multi site mobility network configuration
Multi site mobility network makes it possible to use portable DECT
handsets on various MCDN nodes with installed SIP DECT systems. It is
possible for only one subscription to be in the handset for all SIP DECT
systems when you use SARI. In this case SARI on all SIP DECT systems
must be the same.
ATTENTION
When the handset is on a remote MCDN node, the ring back tone is given to a
party calling the local DN even if the handset is busy.
ATTENTION
Before starting multi-site Configuration, perform the following steps:
•
Create any type of SIP DECT configuration on each MCDN node selected for
MSMN.
•
Connect the systems configured for MSMN through trunks. Configure the
uniform (UDP) or coordinated (CDP) numbering plan.
This section contains the following topics:
•
"Subscribe a multiple-site DECT handset" (page 151)
•
"Import and export subscriptions" (page 151)
•
"Configure NRS for multiple-site mobility network" (page 152)
•
"Call server configuration to MSMN" (page 153)
•
"Configuration of Personal Call Assistant" (page 156)
•
"Configuration of UEXT on the remote system" (page 157)
Go to step 7.
Click Save System and deactivate the system.
Ensure DHCP and TFTP servers are configured properly, so that
DAPs can start in all Branch Offices.
Activate the system and restart all DAPs.
Start DAP Manager, open Access Points page and ensure all
DAPs are present and working.
Perform the procedures for configuration on Element Manager,
NRS, and Call server which are discussed in
configuration" (page
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
143).
--End--
"Branch Office