Nortel CS 1000 Manual page 134

134 SIPN configuration
•
Procedure 74 "Adding Gateway Endpoint for the signaling server "
(page 136)
•
Procedure 75 "Adding Gateway Endpoint for DAP redirect server"
(page 136)
•
Procedure 76 "Configuring routing entries for DAP Redirect Server"
(page 137)
•
Procedure 77 "Configuring routing entries for the signaling server"
(page 139)
•
Procedure 78 "Saving changes" (page 139)
ATTENTION
Before you can change the NRS configuration, you must switch the database
view to Standby mode. The database is in Active database view when you
open the Domains Web page. After you change the standby database, swap
the active and standby databases by running a database Cut over command.
For more information about the NRS database operation, see Network Routing
Service Fundamentals (NN43001-130).
Creating service domain
Create a service domain.
Procedure 71
Creating service domain
Step
1
2
3
4
5
Adding the UDP domain
Add the UDP domain.
Action
Select Numbering Plans > Domains.
The Domains page appears.
Click the Service Domains (X) tab.
Click Add.
Enter the SIP Domain Name you configured on the signaling
server, for example, mera.ru, for Domain name and a domain
description, for example, Mera Lab.
The SIP domain you enter here must be the same as the
SIP domain name you enter in
Settings" (page 110).
Click Save.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
Procedure 45 "Configuring IP
--End--