Nortel CS 1000 Manual page 115

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 115
7 Ensure that the max_intern_dnr_len check box is selected, and
select the maximum number of digits in the internal DNs.
DNs that contain more digits than configured for this parameter
are defined as external. Depending on DECT handset
capabilities, you can configure separate ringing melodies for
internal and external calls.
8 Ensure that the mwi_support check box is selected, and that
no is selected.
9 Ensure that the use_registrar check box is selected, and that
no is selected.
10 Ensure that the multiple_SIP_ports check box is selected, and
that no is selected.
11 Ensure that the redirect check box is selected, and that yes is
selected.
12 Optionally, select the t_overlap_first check box, and enter the
value (in seconds) to define the length of time the DAP waits
for the user to dial the first digit. If no new digit is dialed within
the specified period of time, the DECT handset goes on-hook
automatically.
13 Optionally, select the t_overlap_final check box , and enter the
value (in seconds) to define the length of time the DAP waits
for the user to dial the next digit of the number (when the user
has already dialed at least one digit). If no new digits are dialed
within the specified period of time, the dialed number is called.
This value is also applied to the predial mode.
14 Click Apply.
Procedure 49
Configuring DECT Settings
Step Action
1 In the Settings pane, click the DECT Settings button.
The DECT Settings window appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--